Characteristics
Control valve to be used for the proportional oil pressure control for the oil burner. It can change the oil pressure in accordance with the air pressure. Kerosene, light oil, or heavy oil can be used as the fuel. The oil pressure is kept at approximately 10 times higher than the loading pressure from the air pipe.
| Accessories | Y-Type Strainer(200 mesh) |
Specifications
| Connection Aperture | 15A |
| Loading Pressure | 0～10kPa |
| Maximum Flow Rate | 250l/h |
| Proportional Range: | 15： 1 |
| Primary Oil Pressure | Standard 0.2MPa Maximum 0.3MPa |
| Secondary Oil Pressure | 0～0.1MPa（Controlled Pressure） |
| Applicable Fuel | Kerosine、Light Oil、A.Oil、B.Oil |
| Service Temperature | 80℃ Or Less. |
| Mass | 6.0kg |
| With Standing Pressure | 0.5MPa Balancing Diaphragm with Standing Pressure 0.3MPa 0.3MPa |
Outline drawing
Download of DXF data
※ Download procedure
- Put the cursor on the model designation of the outline drawing you want to download, and click the right button of the mouse.
- Select “Save Target As (A)” on the menu.
- Select a location to save, and click “Save.”
※ Some security software does not permit downloading. If that happens, set the securities to “OFF” before downloading.
Construction drawing
Flow sheet
