Characteristics
This burner can mix the furnace by the high-speed heating gas at 60-80m/sec. So, distributed heating is uniform. The ratio of turndown is high, 10 : 1. Therefore this burner can be used for hot air.
Specifications / Shape dimension
Specifications
| Fuel | Fuel Gases |
| Standard Pressure | Gas：2～10kPa Air：6ｋPa |
| Type | Capacity kW （×1,000kcal/h） |
Main Air Flow Rate （m3/h） |
Connection | |
| Air | Gas | |||
| SGL-1S | 58（50） | 69 | Rc 1 1/2 | Rc 3/4 |
| SGL-1 | 116（100） | 134 | ||
| SGL-2 | 209（180） | 238 | Rc 2 | |
| SGL-3 | 372（320） | 424 | Rc 3 | Rc 1 1/2 |
| SGL-4 | 580（500） | 656 | Rc 4 | |
Dimension
| Type | A | B | C | D | E | F | G | H | J | K | L | M | N （G） | P （G） | Mass(kg) |
| SGL-1S | 380 | 180 | 90 | 85 | 25 | 12 | 45 | 65 | 160 | 190 | 220 | 12 | 3/4 | 1/2 | 19 |
| SGL-1 | 410 | 210 | 20 | ||||||||||||
| SGL-2 | 450 | 235 | 100 | 90 | 70 | 180 | 210 | 240 | 27 | ||||||
| SGL-3 | 615 | 300 | 140 | 135 | 40 | 14 | 65 | 95 | 230 | 265 | 300 | 15 | 1 | 3/4 | 55 |
| SGL-4 | 695 | 350 | 160 | 145 | 16 | 110 | 270 | 310 | 350 | 19 | 98 |
Download of DXF data
※ Download procedure
- Put the cursor on the model designation of the outline drawing you want to download, and click the right button of the mouse.
- Select “Save Target As (A)” on the menu.
- Select a location to save, and click “Save.”
※ Some security software does not permit downloading. If that happens, set the securities to “OFF” before downloading.
Flame Pattern
| Condition | |
| In the Air | |
| Air Pressure | 6kPa |
| Fuel | LPG |
| Excess Air Ratio | 1.05 |
| Type | ØD （mm） | L （mm） | L1 （mm） |
| SGL-1S | 80 | 450 | 180 |
| SGL-1 | 100 | 600 | 210 |
| SGL-2 | 130 | 800 | 235 |
| SGL-3 | 170 | 1,000 | 300 |
| SGL-4 | 230 | 1,200 | 350 |