Characteristics
The flame of this burner can be changed to a downward direction at a luminous long flame. The flame cone is attached, so this burner needs no burner tile. You can use this burner for cremating furnaces, incinerators, metal melting furnaces and other ceramic furnaces.
Specifications / Shape dimension
| Fuel | Fuel Gases |
| Standard Pressure | Gas：2～10kPa Air：6kPa |
| Type | Capacity kw（×1,000kcal/h） |
Air Flow Rate （Nm3/h） |
Air Pressure （kPa） |
Gas Pressure （kPa） |
Connection | Mass （kg） |
|
| Air | Gas | ||||||
| LCG-2 | 580（500） | 600 | 6 | 10 | Rc 4 | Rc1 1/2 | 83 |
Download of DXF data
※ Download procedure
- Put the cursor on the model designation of the outline drawing you want to download, and click the right button of the mouse.
- Select “Save Target As (A)” on the menu.
- Select a location to save, and click “Save.”
※ Some security software does not permit downloading. If that happens, set the securities to “OFF” before downloading.
Flame Pattern
| Condition | |
| In the Air | |
| Air Pressure | 6kPa |
| Fuel | LPG |
| Excess Air Ratio | 1.1 |
| Model | ØD （mm） | L （mm） | L1 （mm） |
| LCG-2 | 450 | 2,200 | 150 |